Method for quickly thawing water pipes.

Best answer: Insert a soft plastic pipe with a diameter of one centimeter into the frozen water pipe, then slowly pour boiling water into the thin pipe with a kettle, and then slowly extend the cannula inside until the ice melts and thaws. Water pipes are water supply pipes. Water pipes in modern decoration are all built with buried walls. There are three types of water pipes. The first type is metal pipes, such as hot-dip cast iron pipes lined with plastic, copper pipes and stainless steel pipes.

You can insert a soft plastic pipe with a diameter of one centimeter into the frozen water pipe, then slowly pour boiling water into the thin pipe with a kettle, and then slowly extend the cannula inside until the ice melts and thaws. Water pipes are water supply pipes. Water pipes in modern decoration are all built with buried walls. There are three types of water pipes. The first type is metal pipes, such as hot-dip cast iron pipes lined with plastic, copper pipes and stainless steel pipes. The second category is plastic-clad metal pipes, such as steel-plastic composite pipes and aluminum-plastic composite pipes. The third category is plastic pipe, such as lead pipe and polypropylene fiber pipe.

Copper pipe has the advantages of corrosion resistance and bacteria elimination, and is the first-class product in water pipes. The connection modes of copper pipe interface include ferrule, welding and self-locking circlip. There is a problem of aging and water leakage when the clamping sleeve is stuck for a long time. Welding is to use hot melting technology to weld two connectors to achieve the connection effect. Because of the high connection strength, it is difficult to meet the standard for gas protection of weld joints in the field, which causes the weld joints to rust easily and directly reduces the service life of pipelines. The installation quality is highly dependent on the welding workers’ technology, and the quality is difficult to stabilize. The operation is simple and convenient, and the construction personnel only need to be familiar with the operation requirements, and can master them with a little practice. When connecting, the cut end face of the pipe should be perpendicular to the pipe axis, the burrs inside and outside the cut should be cleaned up, and the depth to be inserted should be marked on the outer side of the front end of the copper pipe with a marker, and then the copper pipe should be inserted into the pipe fitting to the end with force. Low installation risk, suitability for various installation environments, reusability, environmental protection and energy saving; It is leak-free, shockproof, resistant to thermal expansion and contraction, safe to use, durable and reliable.

Leave a Reply 0

Your email address will not be published. Required fields are marked *